CAMPER TOP OPTIONS

All of our Caravan Camper Shells are custom crafted with the finest materials. Because of this, you are able to choose from a wide array of accessories and options. We’ll assist you in designing and building a shell to your complete satisfaction. Feel free to give us a call and together we’ll design a shell to enjoy all of your next great adventures.

Deluxe Double Doors

Two full locking rear doors 49 1/2” wide opening (43” small trucks) Standard on all models.

Tapered Sides

Sides of the shell are slanted in, similar to the shape of the truck cab this provides for good aerodynamics and looks. Standard on all models.

Straight Sides

Sides of the shell are straight providing for maximum interior space. Optional all models.

Extra Height

There is an additional charge for heights from 30” to 34” max. height above the top of the bed rails. Optional on all models (full sized trucks only).

Steel Side Door & Storage Box

This is standard on both sides of “The General”, Standard on the Driver side of “Worksport”. Gun/Tool Racks mounted in the Storage Box are also optional.

Windoors

Windoors (lift open windows) with screened sliding windows in the center. Standard on the passenger side of “Worksport”. Standard on both sides of “Journey”.

Long Screened Sliding Side Windows

The rear half slides forward. Standard on both sides of “Adventure”.

Short Screened Sliding Side Windows

The rear half slides forward. Standard on both sides of “Voyager”.

Dropdown Front Windows

These windows make it easy to clean the outside of the front window and the cab window. Available with solid glass or with split sliding windows in the center. Optional on all models.

Shelves

Shelves run lengthwise above the side windows and are available on one side or both sides, they are usually 8” wide and 2” deep. Optional on all models.

Ventilator And Power Fan

Pressurizing air ventilator is water resistant and increases the inside air pressure which aids in keeping dust out, it also allows the interior to breathe. Ventilator is Standard on all models, The Power Fan for the ventilator forces a higher interior pressure for extreme dusty conditions. Power Fan is optional for all models.

Dome Lights

One Dome Light is Standard on all models, a second Dome Light is optional.

Rear Lights

LED Brake Lights are Standard on all models, LED Reverse/Loading lights turn on when the vehicle is in reverse and can be turned on manually with a toggle switch that is located inside the camper shell. Reverse/Loading Lights are optional on all models.

Replace Or Relocate Tailgate Backup Camera

If your truck has an OEM backup camera in the tailgate we can replace or relocate it (depending on your OEM camera system). Optional on all models.

Standard Or Low Profile Roof Racks

Racks are custom fit to each camper shell and available in two styles, Standard & Low profile, (Standard with tie down rings up high) (Low Profile with tie down rings down low) the front racks are made from angle iron which helps to reduce wind noise. Boat Rollers are 18” long on each side of the rear rack and are optional. If your rack is for a boat please measure the width so that we can make sure your racks are wide enough. “The General” model comes standard with three racks. Two are standard on the “Worksport” and a third is optional. Racks are optional on other models.

Cabover Extension

Have some kayaks you need to transport? Maybe a hang glider? Or perhaps a stack of 2×4’s? We’ve got you covered with the Cabover extension option for our Caravan Camper Shells. You can request this feature to be included in your new custom-designed shell. We also are able to mount this extension to your existing Caravan Camper Shell roof rack. It features sturdy steel construction with large rectangular tubing base rails. It’s then all finished with epoxy primer & black Rust Shield corrosion control coating

3 Stage Colors

Tri coat and 3 stage paint colors are used on some higher end trucks and there is an additional charge for matching them (usually but not limited to pearlescent whites)

Bedrug Bed Liner

This is the most innovative and unique truck bed liner there is. You get the look and comfort of carpet, in an ultra-tough 100% polypropylene (essentially plastic) product. That means not only will it protect your truck bed from impact dings and damage, it will stand up to the harshest conditions you can throw at it: from gravel to battery acid, while still protecting your precious cargo and your knees! Just clean it with a hose, power washer or vacuum and your BedRug is good as new.

Bedrug Floor Mat

The Bedrug Mat is made to fit your specific make and model and will give you the look and feel of carpet in an ultra-tough 100% polypropylene (essentially plastic) product. It will protect your truck while standing up to whatever you can throw at it. The mat liner is gas, oil, bleach, and chemical resistant and offers easy cleanup. With its cushioned foam non-skid surface, it will keep everything in place while protecting your cargo and your knees.

Rubber Bed Mat

Custom molded for most truck applications

– Textured pebble surface helps reduce shifting, while raised ribs ease loading and unloading of cargo

– Underside allows for drainage to keep truck bed dry, helping to prevent rust and mildew

– Prevents cargo from shifting

– Made of high-strength Nyracord®

– 3/8 inch thick

– Will not crack or break

Decked Drawer System

DECKED truck bed storage drawers provide the ultimate access and organization for your tools and gear. Customize your truck and keep your gear organized, weatherproof and secure while maintaining full bed use. DECKED DIY tool box is durable with a 2000lb payload and 200lb per drawer rating. 100% American Made.